Quad Build: Week One

We took inventory of all our parts.  Our (4) motors are backordered.  Our Radio Received and Transmitter also didn’t arrive because of the snow storms up North last week.  Additional items that don’t come with quad components are extra wiring and soldering materials.  We had these items from FTC, so we were okay.  We first talked about all the Lumenier parts provided by our partner www.GetFPV.com .  We are grateful that this local Distributor took interest in Brick Buddies and our Build Project. We looked at what parts of the Build we could move forward with, minus the motors. photo 2 We decided we would be able solder the Speed Controllers to the Power Distribution Board.  The QAV 250 makes a nice integrated Board as part of this small Quad. Lumenier provides some good support and assembly instructions for the Frame of the QAV 250.  No soldering instructions come with the Parts, so we searched Youtube for video, to confirm we were on the right track.  We each took turns soldering the (4) ESCs to the Board.  This was A LOT of soldering. photo 4  The QAV has also two integrated LED strips which we also completed soldering and attaching to the Board.  We will meet again when our other parts arrive.  At our next practice, we hope to attach the motors and bind the Radio to our Quad.  We think get all the wiring correct with the electronics will be the most challenging part of the Build!  We will document our Build and provide a Resource Page for people who want to get involved in the Quadcopter Hobby and buy or build their own.